Abstract

Straintronics involves the manipulation and regulation of the electronic characteristics of 2D materials through the use of macro- and nano-scale strain engineering. In this study, we utilized an atomic force microscope (AFM) coupled with an optical system to perform indentation measurements and tip-enhanced photoluminescence (TEPL), allowing us to extract the local optical response of a suspended monolayer membrane of ternary WSSe at various levels of deformation, up to strains of 10%. The photoluminescence signal is modelled considering the deformation, stress distribution and strain dependence of the WSSe band structure. We observe an additional TEPL signal that exhibits significant variation under strain, with 64 meV per percent of elongation. This peak is linked to the highly strained 2D material lying right underneath the tip. We discuss the amplification of the signal and its relation to the excitonic funnelling effect in a more comprehensive model. We will also compare the diffusion caused by Auger recombination against the radiative excitonic decay. We use TEPL to examine and comprehend the local physics of 2D semi-conducting materials subjected to extreme mechanical strain. Chemical vapour deposition-fabricated 2D ternaries possess high strain resistance, comparable to the benchmark MoS2, and a high Young's modulus of 273 GPa.

Abstract

Straintronics involves the manipulation and regulation of the electronic characteristics of 2D materials through the use of macro- and nano-scale strain engineering. In this study, we utilized an atomic force microscope (AFM) coupled with an optical system to perform indentation measurements and tip-enhanced photoluminescence (TEPL), allowing us to extract the local optical response of a suspended monolayer membrane of ternary WSSe at various levels of deformation, up to strains of 10%. The photoluminescence signal is modelled considering the deformation, stress distribution and strain dependence of the WSSe band structure. We observe an additional TEPL signal that exhibits significant variation under strain, with 64 meV per percent of elongation. This peak is linked to the highly strained 2D material lying right underneath the tip. We discuss the amplification of the signal and its relation to the excitonic funnelling effect in a more comprehensive model. We will also compare the diffusion caused by Auger recombination against the radiative excitonic decay. We use TEPL to examine and comprehend the local physics of 2D semi-conducting materials subjected to extreme mechanical strain. Chemical vapour deposition-fabricated 2D ternaries possess high strain resistance, comparable to the benchmark MoS2, and a high Young's modulus of 273 GPa.

Abstract

Straintronics involves the manipulation and regulation of the electronic characteristics of 2D materials through the use of macro- and nano-scale strain engineering. In this study, we utilized an atomic force microscope (AFM) coupled with an optical system to perform indentation measurements and tip-enhanced photoluminescence (TEPL), allowing us to extract the local optical response of a suspended monolayer membrane of ternary WSSe at various levels of deformation, up to strains of 10%. The photoluminescence signal is modelled considering the deformation, stress distribution and strain dependence of the WSSe band structure. We observe an additional TEPL signal that exhibits significant variation under strain, with 64 meV per percent of elongation. This peak is linked to the highly strained 2D material lying right underneath the tip. We discuss the amplification of the signal and its relation to the excitonic funnelling effect in a more comprehensive model. We will also compare the diffusion caused by Auger recombination against the radiative excitonic decay. We use TEPL to examine and comprehend the local physics of 2D semi-conducting materials subjected to extreme mechanical strain. Chemical vapour deposition-fabricated 2D ternaries possess high strain resistance, comparable to the benchmark MoS2, and a high Young's modulus of 273 GPa.

Abstract

Straintronics involves the manipulation and regulation of the electronic characteristics of 2D materials through the use of macro- and nano-scale strain engineering. In this study, we utilized an atomic force microscope (AFM) coupled with an optical system to perform indentation measurements and tip-enhanced photoluminescence (TEPL), allowing us to extract the local optical response of a suspended monolayer membrane of ternary WSSe at various levels of deformation, up to strains of 10%. The photoluminescence signal is modelled considering the deformation, stress distribution and strain dependence of the WSSe band structure. We observe an additional TEPL signal that exhibits significant variation under strain, with 64 meV per percent of elongation. This peak is linked to the highly strained 2D material lying right underneath the tip. We discuss the amplification of the signal and its relation to the excitonic funnelling effect in a more comprehensive model. We will also compare the diffusion caused by Auger recombination against the radiative excitonic decay. We use TEPL to examine and comprehend the local physics of 2D semi-conducting materials subjected to extreme mechanical strain. Chemical vapour deposition-fabricated 2D ternaries possess high strain resistance, comparable to the benchmark MoS2, and a high Young's modulus of 273 GPa.